Solid Hardwood Floor Installation in Chicago
Precision-milled white oak, red oak, and maple floors installed by Lakefront's own crew, with subfloor moisture checks and flat-rate pricing.
Precision-Milled Solid Hardwood for Chicago Homes
Solid hardwood installation from Lakefront Hardwood & Flooring Co. brings precision-milled white oak, red oak, and maple flooring into Chicago homes. Every board is acclimated on site, tested against your subfloor, and installed by our own full-time crew using commercial-grade tools.
We install Mirage and Lauzon domestic hardwoods, sourcing boards that are properly kiln-dried and graded for residential wear. Whether you are replacing carpet in a single room or outfitting an entire home, the process stays the same: moisture testing, subfloor prep, and an in-house crew that never hands your floor off to a subcontractor.

- Solid white oak, red oak, and hard maple species
- Subfloor moisture testing before install
- Flat-rate pricing with no hidden prep fees
- In-house crew, no subcontractors
- 5-year workmanship warranty
Who Solid Hardwood Installation Is For
Solid hardwood installation is for Chicago homeowners who are remodeling, replacing worn carpet, or matching new floors to existing hardwood in historic rooms. It is a strong fit for living rooms, dining rooms, hallways, and bedrooms where you want a surface that can be sanded and refinished for decades.
If your home already has original hardwood in some rooms and you want a continuous look throughout, we can lace in new boards and stain the entire floor so the transition disappears. This is common in Chicago bungalows and two-flats where old walls have been removed or rooms have been opened up.
Common Floor Problems We Solve
Creaking and Squeaky Floors
Loose boards and uneven subfloors cause squeaks underfoot. We secure loose boards, level the subfloor, and fasten new flooring so it stays quiet underfoot.
Seasonal Gapping
Chicago humidity swings cause solid wood to expand and contract. Proper acclimation and controlled board widths minimize visible gaps between boards over time.
Subfloor Moisture
Moisture under new flooring causes cupping, warping, and adhesive failure. We test every subfloor before installation and will not proceed if readings are outside the safe range.
Matching New Boards to Existing Floors
Lacing new boards into an older floor so the seam disappears requires matching species, grain direction, and stain. We do this regularly in homes where walls have been removed.
Our Installation Approach
- In-house NWFA-certified installation crew
- Subfloor moisture testing on every project
- Subfloor leveling and preparation included
- Zero subcontractors from measure to finish
- Flat-rate pricing with no hidden disposal or prep fees
Why Solid Hardwood Lasts
What to Expect During Installation
A structured approach so your floor is measured, prepped, and installed with precision from start to finish.
In-Home Estimate
We measure, check subfloor moisture, and deliver a written line-item estimate within 24 hours.
Acclimation & Prep
Wood is acclimated on site and the subfloor is leveled and cleaned before installation.
Installation
Boards are nailed or glued down, staggered for strength, and transition strips are fitted.
Final Inspection
We walk the floor with you, confirm the finish, and send your first evening project update.
Choosing Your Hardwood
Board Widths
Solid hardwood is available in narrow 2.25-inch strips, 3-inch and 4-inch planks, and wide 5-inch-plus boards. Narrower boards are more dimensionally stable in older Chicago homes where seasonal humidity shifts are common. Wider planks show more grain character and work well in open, modern rooms.
Wood Species
White oak, red oak, and hard maple are the most popular solid hardwood species for Chicago homes. Each has a distinct grain, tone, and hardness rating. Compare them in the species guide below to find the right fit for your space.
Site-Finished vs. Prefinished
Site-finished hardwood is installed raw and finished on site with Bona Traffic HD or DuraSeal stain, allowing full color matching to existing floors. Prefinished boards arrive with a factory finish and install faster but cannot be stained or matched on site.
White Oak vs. Red Oak vs. Maple
The species you choose affects how your floor looks, wears, and takes stain. Here is how the three most popular solid hardwoods compare for Chicago homes.
White Oak
- Grain
- Tight, closed grain
- Tone
- Warm brown with cooler, slightly gray undertones
- Best Fit
- Modern and transitional homes. Denser than red oak, so it resists dents in high-traffic rooms.
Red Oak
- Grain
- Open, pronounced grain pattern
- Tone
- Warm with pinkish-brown undertones
- Best Fit
- Classic American flooring. Takes stain evenly, so it is ideal when you want a custom color match.
Hard Maple
- Grain
- Fine, tight, uniform grain
- Tone
- Creamy off-white to light tan
- Best Fit
- Bright, contemporary spaces. Extremely hard and dent-resistant, though it does not take dark stains as well as oak.
Related Hardwood Services
Dustless Hardwood Refinishing
Already have solid hardwood? Our HEPA-contained sanding and Bona refinishing restores existing floors without the dust.
Learn moreCustom Staircase Refinishing & Treads
Match your new floors to your staircase with refinished or replaced treads and risers stained to blend.
Learn moreEngineered Hardwood & LVP Installation
Need a floor for a basement or high-moisture area? We install engineered hardwood and luxury vinyl plank over leveled subfloors.
Learn moreWhat Customers Are Saying
“We got three quotes for white oak installation in Evanston. Lakefront was the only company that showed up on time, checked subfloor moisture levels on the spot, and texted us a clear breakdown the same evening.”
Frequently Asked Questions
Ready to Start Your Solid Hardwood Installation Project?
Tell us about your floor. We will measure, check your subfloor, and deliver a written line-item estimate within 24 hours with no hidden prep or disposal fees.