Staircase Refinishing & New Oak Treads in Chicago

We sand and refinish existing wood stairs or install new solid oak treads and risers, hand-detailed in tight corners and stained to match your refinished floors.

Hand-Detailed Staircase Refinishing and New Oak Treads

Custom staircase refinishing and tread installation from Lakefront Hardwood & Flooring Co. restores the most visible woodwork in your home. We sand and refinish existing wood stairs, remove worn carpet runners, and install new solid oak treads, risers, and bullnose trim stained to match your refinished floors.

Staircases get more hand work than any other part of a flooring project. Treads, risers, nosings, and skirt boards each need detailed sanding in tight corners that machines cannot reach. Our in-house crew handles every step by hand, finishes with the same Bona Traffic HD used on your floors, and never hands the work to a subcontractor.

Refinished hardwood staircase with new solid oak treads and risers in a Chicago home
  • Sanding and refinishing of existing wood stairs
  • Removal of worn stair carpet and pad
  • New solid oak tread, riser, and bullnose installation
  • Exact stain matching with DuraSeal and Bona Traffic HD topcoats
  • In-house crew, no subcontractors, 5-year workmanship warranty

Who Staircase Refinishing Is For

Staircase refinishing is for Chicago homeowners upgrading carpeted stairs to hardwood, or matching an entryway staircase to newly refinished main-level floors. If your stairs are the first thing guests see when the door opens, refinishing or replacing the treads is one of the fastest ways to change the feel of the whole entry.

It is also a strong fit when you are already refinishing the floors around the staircase. Refinishing both at the same time lets us stain the treads and the floor together for a single, continuous color match, with no visible line where the stairs meet the hallway.

Common Staircase Problems We Solve

Mismatched Stain Between Stairs and Hallway

Stairs refinished at a different time than the surrounding floor often read as a different color. We stain treads and floors together with DuraSeal so the staircase and hallway match.

Squeaky Treads

Loose treads and stringers squeak under every step. We secure the staircase structure, add fasteners, and shim movement before finishing so the stairs are quiet.

Worn or Rounded-Over Noses

High-traffic stair noses round over and splinter over time. We sand noses back to a crisp profile or replace them with new solid oak bullnose trim.

Dated Carpet Runners

Carpet runners trap dirt, wear out, and hide the wood underneath. We remove carpet, pad, and tack strips, then refinish or replace the treads for a clean hardwood staircase.

Our Staircase Refinishing Approach

  • Hand-detailed sanding in tight corners and edges
  • Exact stain matching with DuraSeal to your floor color
  • Durable Bona Traffic HD topcoats on every tread
  • Carpet, pad, staple, and tack strip removal included
  • Zero subcontractors from assessment to final walk-through

Why Homeowners Refinish Their Stairs

Instant entryway upgrade that changes the feel of the whole home
Hardwood treads are easier to clean than carpet and hold up to daily traffic
Stain matched to your refinished floors for a continuous look
Backed by our written 5-year workmanship warranty

What to Expect During Your Staircase Project

Whether we are refinishing your existing treads or replacing them with new solid oak, the work follows a careful, hand-detailed process. Here is what to expect from estimate to final walk-through.

Step 1

Tread Assessment

We inspect each tread, riser, and stringer for damage, squeaks, and wear, and confirm whether your stairs can be refinished or need new treads.

Step 2

Carpet Removal & Prep

We strip worn carpet, pad, staples, and tack strips, then repair loose or squeaky treads and secure the staircase structure.

Step 3

Hand Sanding & Stain

We sand treads and risers through multiple grits, hand-detailing tight corners and edges, then apply DuraSeal stain matched to your floor color.

Step 4

Bona Coat & Walk-Through

We finish with durable Bona Traffic HD topcoats, reinstall trim and nosings, and walk the staircase with you to confirm the match and finish.

Choosing Your Staircase Look

Full Tread Replacement

When existing treads are worn thin, warped, or were covered in carpet for years, we remove them and install new solid oak treads and risers. New treads give you fresh, thick wood that can be refinished again decades later.

Painted White Risers with Stained Oak Treads

A popular Chicago look pairs crisp white painted risers with stained oak treads. We prime and paint risers in a durable finish and stain the treads to match your floor, then seal both with Bona Traffic HD.

Landing and Nosing Matching

Where your staircase meets a landing or hallway, we match the nosing and landing boards to the surrounding floor so the transition is flush and the stain reads as one continuous surface.

Anatomy of a Staircase Upgrade

A staircase is built from several distinct wood parts, and each one needs its own prep and finish. Here are the components we handle and how we treat each one.

Treads

The horizontal boards you step on. We sand existing treads flat or install new solid oak treads, then stain and topcoat them to match your floor.

Risers

The vertical boards between each tread. We sand and finish risers to match, or prime and paint them white for a classic two-tone staircase.

Bullnose & Landings

The rounded front edge of each tread and the flat landing where the stairs turn. We sand noses back to a crisp profile and match landing boards to the surrounding floor.

Skirt Boards & Trim

The trim running along the side of the staircase. We mask and protect skirt boards, reinstall base shoe and trim after finishing, and leave the surrounding woodwork clean.

What Customers Are Saying

“They matched new oak boards into our existing dining room floor so well you literally cannot tell where the old wall used to be. Worth every penny.”
Claire & Tom H.Oak Park

Frequently Asked Questions

Ready to Start Your Custom Staircase Refinishing & Treads Project?

Tell us about your floor. We will measure, check your subfloor, and deliver a written line-item estimate within 24 hours with no hidden prep or disposal fees.